Mounting holes built into the back surfaceof the monitor allow it to be mounted
by rear mount using VESA75 or VESA100 compatible mounts.
PANEL (Flush) MOUNT
For installation, there are four tapped mounting slots on both sides of the monitor.
The mounting hardware packet is included with the product accessories in the
shipping box. This packet includes four (4) stainless steel threaded studs, 3.2 cm and
four (4) mounting lock nuts.
The AWM monitor can be installed using the mounting lock nuts (supplied) in the
vertical keyways. Make sure that both brackets are installed in the same orientation.
Preparing the installation site
1. Select an installation site that has sufficient space behind it for cable connections
and ventilation.
2. Tape the supplied flush mount template in the required position.
3. Using a jigsaw, carefully remove the shaded portion of the template.
4. Using a suitable file, smooth the edges of the opening.
9
