Installing the display
1. Carefully insert the monitor into the opening so the gasket on the backside
of the bezel edge lays flat against the front edge of the cut out.
IMPORTANT
:
The gasket must lay flat against the cut out edge to ensure watertight
integrity.
2. Place the mounting bracket lugs into the keyways and move them to the rear, securing
the bracket to the monitor.
3. Using a suitable screwdriver, tighten the mounting bracket screws to secure the
monitor in position and compress the gasket.
NOTE: If console is thicker than 6/16 inch (10mm), caps on the ends of the screws may be
removed to provide additional clearance
10
