background image

AIR MAGNA 100

GREEN ENERGY SYSTEMS

7

3.Installation

3-2 Movement

1)Because the gravity center of the unit is not in the middle, when you move the machine, please 

beware of the drumping.

2) Please do not hold the air inlet, or it will be deformed.

3) In the movement, please don’t touch the fan blade by hand or other things in order to prevent 

from the damage on the fan blade.

4)Please don’t lean it more than 45°C or lie it down.

5) Please try to use the auxiliary equipment, such as the forklift or crane to prevent the body injury 

caused by the overweight in the movement of the big models.

 

Warning

Determine the feasible moving path.

Please try to move the unit under the condition of the original

Install the accessories according to the requirements.

3-3 Installation

The installation should be done by the qualified dealer or professional technicians.

If the installation is improper, it may cause the water leak, current leak or accidents such as fire.

The installation bearing surface should be flat and can support the weight of the unit.

Please install the unit firmly by using the MB expansion valve to fix it on the stand and antivibration

rubber pads should be used to prevent the abnormal vibration and noise.

Please try to remove the barrier around the unit, otherwise the air circulation range will be too

small and affect the performance.

If the unit is installed in the basement, indoor or in the other closed space, good air circulation

between the unit and outdoor should be ensured.

If the unit is installed at the seaside or in the high place where there is strong wind, to make sure

the normal operation of the fan blade, it must be installed against the wall. If necessary please

use the baffle.

In the place where there is strong wind, please make sure the air outlet of the unit and the strong

wind are the same direction, in order to prevent the strong wind blow to the indoor unit and

affects the performance. If the wind direction can’t be ensured, please put baffle in front of wind.

 

 

Attention

The installation of the unit should comply with the user manual.

When the unit is moved to another place, the movement and installation should be

done by the professionals.

If the user installs the unit on their own, we’ll not be responsible for the accidents such

Содержание ANTEK AIR MAGNA 100



































Отзывы: