Green Energy ANTEK AIR MAGNA 100, Руководство по установке и обслуживанию

Страница: 6 / 34

AIR MAGNA 100
GREEN ENERGY SYSTEMS
6
3.Installation
Attention
The following installation places may cause the malfunction of the machine
The places where there is mineral oil;
The place that contains salt in the air, such as the seaside;
The place that contains corrosive gas, such as hot spring area;
The place where the powers supply voltage fluctuates seriously;
In the car or cabin etc.;
The place where is full of oil gas and oil spray, such as the kitchen;
The place where there is strong electromagnetic waves;
The place where exists flammable gas or material;
The place where there is acidic or alkali gas evaporation;
Other places where belongs to special environmental conditions
3-1 The choice of the installation location
The unit can be installed on the balcony or external wall; meanwhile, please waterproof
measures should be done well.
There is sufficient space for installation and maintenance.
There is no barrier in front of the heat pump air outlet and strong wind can’t blow there.
The installation place should be well ventilated and avoid the environment where
there is flammable, explosive gas and strong corrosive gas.
The installation place should be convenient to install the pipe and electric wiring.
The bearing surface is flat, can withstand the unit weight and doesn’t increase the
vibration and noise.
If the installation base is metal parts, insulation treatment must be done well, and to
comply with relevant standards.
The running noise and discharge cold air will not affect yourselves and your neighbours
The high voltage and strong magnetic field should be avoided.
There should be no water logging in the installation place.
The unit should be blocked up to install if sundries or snow may accumulate in the
installation place.