Green Energy ANTEK AIR MAGNA 100, Руководство по установке и обслуживанию

Страница: 4 / 34

AIR MAGNA 100
GREEN ENERGY SYSTEMS
4
I. Safety Precautions
Warning
Requirements for the installation environment
The installation location must be ventilated, waterproof, sun-proof, and requires a convenient
powersupply, water supply and drainage channels.
Customer‘s electrical environment must be in accordance with local electrical safety regulations.
The power supply specifications conform to the requirements of the local rating. There must be
reliable grounding, leakage protector and give the machine power supply directly by the
leakage switch wiring way.
The wall or stand must meet the bearing requirements The installation, maintenance and
renovation must be done by the designated dealer and professionals.
If the operator does not have relevant professional knowledge and authorization, but install and
repair to result in the damage on furniture and decoration, injury or electric shock, and even
serious accidents such as fire, we’ll not assume legal responsibility.
The requirement on installation accessories Please use the accessories in the packing according
to the requirement, do not replace them with any other similar.
The purchased parts must be the designated model or specification, if the parts beyond the
specified are used and result in the accidents, we’ll not take the responsibility.
Attention
The household power supply, circuit to comply with relevant standards
The power circuit should be equipped with leakage protector.
Check whether the socket is qualified, after the unit runs for half an hour, remove the plug, if the
pin is hot, that means the plug has more than 50 °C and must be replaced by another qualified
one.
The location of the power supply should be not less than 1.8 meters from the ground, and be
water-proof well and far from children.
The power lines have no damage. If there is any damage, please contact the relevant dealer or
professional staff for replacement.
The unit should be installed firmly to run without vibration and the noise will not affect the
neighbors.
Drainage piping can smoothly drain and will not lead to leakage or make the furniture wet.
The installation space is well ventilated, once there is refrigerant leakage, the gas will not gather,
so there is no combustible gas leak near the installation location. If there is such risk, please
change the installation environment, otherwise, it’s easy to cause poisoning, fire accident, etc.
Do not keep the unit in the humid environment or exposed to the rain, otherwise it’s easy to
damage the unit.
If there is refrigerant leak during the installation, ventilation measures must be taken
immediately. Otherwise, if the leaked refrigerant meets fire, such as heater, stove or electric
cooker, etc., poisonous gas maybe produced.