Gree U-Match GU100T/A1-K, Руководство пользователя

Страница: 41 / 54

U-Match Series Cassette Type Unit
37
2) Use a screwdriver to unscrew the terminal screw on the terminal
board.
3) Use nippers to bend the solid wire into a ring that fits the terminal
screw.
4) Form a proper ring and then put it on the terminal board. Use a
screwdriver to tighten up the terminal screw.
(2) For strand wires (as shown below):
1) Use wire cutters to cut off the wire end and then peel away about
10mm of the insulation layer.
2) Use a screwdriver to unscrew the terminal screw on the terminal
board.
3) Use a round terminal fastener or clamp to fix the round terminal firmly
on the peeled wire end.
4) Locate the round terminal conduit. Use a screwdriver to replace it and
tighten up the terminal screw (as shown below).
(3) How to connect the connection wire and power cord
Lead the connection wire and power cord through the insulation tube. Then fix
the wires with wire clamps (as shown in the next figure).