Remote Controller
Introduction for icons on display screen
12
MODE BUTTON
Use the “
MODE
” button to select one of the available modes.
The selected mode will be displayed on the remote controller and
the appropriate light will illuminate on the front display panel.
AUTO
– Unit will automatically select heating or cooling to
maintain room temperature between 68°F and 77°F.
The remote controller will display the Auto Mode icon with
no setpoint.
COOL
– To cool to selected setpoint and remove moisture. Press
or
to adjust
set temperature. System varies compressor speed to maintain desired temperature.
HEAT
– To heat to selected room setpoint. Press or
to adjust set temperature.
System varies compressor speed to maintain desired room temperature.
FAN ONLY
– To circulate air without heating or cooling. Use Fan Speed button to select
speed from low to high.
DRY
– Select
DRY MODE
to increase moisture removal during warm humid conditions.
In this mode, fan speed cannot be adjusted.
1. If the Room Temperature is more than 4°F above the set temperature, the
system will be operating in cooling mode with low fan speed.
2. If the Room Temperature is between 4°F higher than, and 4°F less than, the set
temperature, the system will cycle 6 minutes
ON
and 4 minutes
OFF
in cooling
mode. The indoor fan will be at low speed.
3. If the Room Temperature is more than 4°F below the set temperature, the system
will be
OFF
and the indoor fan will be at low speed.
: AUTO
: COOL
: DRY
: FAN ONLY
: HEAT
Icons Displayed
OPERATION OF WIRELESS REMOTE CONTROLLER
TWD-1594 Livo+ owners printer.qxp_Layout 1 2/21/17 2:11 PM Page 21
9
1
2
3
4
1
3
5
2
MODE
FAN
5
4
6
SWING
TURBO
6
7
7
SLEEP
TEMP
9
8
WiFi
8
CLOCK
LIGHT
11
10
9
12
10
11
12
ON/OFF button
MODE button
FAN button
SWING button
TURBO button
▲
▲/ button
SLEEP button
TEMP button
WiFi button
LIGHT button
CLOCK button
TIMER ON / TIMER OFF
button
TIMER
ON
TIMER
OFF
WiFi
{
models have this function while some
I feel
Operation mode
Light
:Set temp.
:Outdoor ambient temp.
Set fan speed
do not. Please refer to the actual models.
Set time
Up & down swing
Auto mode
Cool mode
Dry mode
Fan mode
Heat mode
Clock
Sleep mode
Send signal
Turbo mode
TIMER ON /
TIMER OFF
Child lock
8
℃
heating function
Set temperature
This is a general remote controller.Some
Temp. display type
:Indoor ambient temp.
OPERATION OF WIRELESS REMOTE CONTROLLER
