10
REMOTE CONTROLLER OPERATIONS
The wireless remote controller is sleek, ve
and functions on your Vireo system from t
buttons make it easy-to-understand and e
The remote controller is set from factory t
remote controller
OFF
with the
ON/OFF
on the remote simultaneously for 5 secon
ON/OFF BUTTON
When the system is in
OFF
mode, the re
the time and last room setpoint. When yo
button, this indicator
will be displayed
the last operating mode and room setpoi
NOTE:
If the
ON/OFF
button is presse
stop, the compressor will not start for
inherent protection against frequent co
TWD-1594 Livo+ owners printer.qxp_Layout 1 2/21/17 2:11 PM Page 23
11
FAN button
SWING button
3
4
Press this button can select up&down swing angle. Fan blow angle can be selected
circularly as below:
Press "▲" or " " button to adjust set temperature. Press "
F
AN" button to adjust
fan speed. Press "SWING" button to adjust fan blowing angle. (Cooling only unit
won’t receive heating mode signal. If setting heat mode with remote controlle
r,
press ON/OFF button can’t start up the unit).
Note:
●
For preventing cold air
, after starting up heating mode, indoor unit will delay 1~5
minutes to blow air (actual delay time is depend on indoor ambient temperature).
● Set temperature range from remote controller: 16~30
℃
(61~86°F)
; Fan speed:
auto, low
speed, medium speed, high s
peed.
This function indicates that moisture on
evaporator of indoor unit will be blowed
after the unit is stopped to avoid mould.
Having set X-FAN function on: After turning off the unit by pressing ON/OFF
button indoor fan will continue running
for a few minutes. at low speed. In this
period, Hold fan speed button for 2s to stop indoor fan directly.
Having set X-FAN function off: After turning off the unit by pressing ON/OFF
button, the complete unit will be o
ff directly.
X-FAN function Hold fan speed button for 2s in
C
OOL or DRY
m
ode, the icon “ ” is
displayed and the indoor fan will continue operation for a few
m
inutes in order to dry
the indoor unit even though you have turned off the unit. After energization, X-FAN
OFF is defaulted. X-FAN is not available in AUTO, FAN or HEAT mode.
●
●
●
Note:
●
Under AUTO speed, air conditioner will
select proper fan speed automatically
according to ex-factory setting.
● Fan speed under dry mode is low spee
d.
Pressing this button can set fan speed circularly as: auto
(
AUTO), low
(
) ,
medium
( ), high( ).
Auto
no display
(horizontal louvers stops
at current position)
▲
● When selecting fan mode, the air conditioner will only blow fan, no cooling and
no heating. Press "F
AN" button to adjust fan speed. Press "SWING" button to
adjust fan blowing angle.
● When selecting heating mode, the air conditioner operates under heat mode.
Heat indicator on indoor unit is ON(This indicator is not available for some models).
● Under auto mode, temperature can be displayed;Under auto mode,set temperature
can be adjusted.
OPERATION OF WIRELESS REMOTE CONTROLLER
