background image

6

TWD-1594 Livo+ owners printer.qxp_Layout 1  2/21/17  2:10 PM  Page 15

15

Child lock function

Under heating mode, press "TEMP" and "CLOCK" buttons simultaneously to start

Press "▲" and "    " simultaneously to turn on or turn o

ff child lock function. When

child lock function is on, "    " icon is displayed on remote controller. If you operate

the remote controller, the "    " icon will blink three times without sending signal to

the unit.

8

 heating function

 heating function. When this function is started up, "     " and "8

up or turn off 8

Note:

will be shown on remote controller, and the air conditioner keep the heating status

at  8

. Press "TEMP" and "CLOCK" buttons simultaneously again to exit 8

heating function.

Under 8

 heating function, fan speed is defaulted at auto speed and it can’t be

adjusted.

Under 8

 heating function, set temperature can’t be adjusted. Press "TURBO"

button and the remote controller won’t send signal.

Sleep function and 8

 heating function can’t operate at the same time. If 8

Under 

 temperature display, the remote controller will display 46

 heating.

  heating function has been set under heating mode, press sleep button will cancel 

   8

 heating function. If sleep function has been set under heating mode, start up 

   the 8

 heating function will cancel sleep function. 

Temperature display switchover function

I FEEL Function

Under OFF status, press "    " and "MODE

" buttons simultaneously to switch temp-

erature display between 

 and 

.

Press "▲" and "MODE" buttons simultaneously to start I FEEL fun

ction and "     " 

will be displayed on the remote controller. After this function is set, the remote 

controller will send the detected ambient temperature to the controller and the unit 

Auto clean function

Under unit off status, hold "MODE" and "FAN" buttons simultaneously for 5s to turn on 

or turn off the internal clean function. When the internal clean function is turned on, indoor

unit displays “CL”. (This function is applicable for some models)

During the self-cleaning process of evaporator, the unit will perform fast cooling or fast 

heating. There may be some noise, which is the sound of flowing liquid or thermal expan-

sion or cold shrinkage. The air conditioner may blow cool or warm air, which is a normal 

phenomenon. During cleaning, please make sure the room is well ventilated to avoid 

affecting the degree of comfort.

Note:

The self-cleaning function can only work under normal ambient temperature. If the room 

is dusty, clean once a month; if not, clean once every three months. After the self-cleaning 

function is turned on, you may leave the room. When self-cleaning is finished, the air 

condition will enter standby mode. 

OPERATION OF WIRELESS REMOTE CONTROLLER

Содержание livo GEN 3 LIVV09HP230V1A
























Отзывы: