Gree Hydro Box NRQR16L/A-T, Руководство пользователя

Страница: 15 / 36

Hydro Box
11
4.2.1.2 Main body installation
Screw hole drilling and bolt installation
(1) First of all, select a proper installation position that complies with the installation space
requirement; then drill 4 holes on the installation base according to the anchors of the hydro
box, as shown below; please refer to the dimension of the expansion bolts for the size of the
holes. (The accompanied expansion bolts are M8 bolts, so the holes should be
φ10mm in
dimension.) The holes should be 45~50mm deep.
Fig.4.2
(2) Fix the 4 expansion bolts (supplied with the unit) into the holes and twist off the nuts and
washers of the bolts.
Fig.4.3
(3) Install the hydro box by aligning it to the bolts. Then tighten up the nuts to complete the
installation.
Fig.4.4