Gree Hydro Box NRQR16L/A-T, Руководство пользователя

Страница: 6 / 36

Hydro Box
2
1.2 Safety Notices.
WARNING: If not abide them strictly, it may cause severe damage to the unit or the
people.
NOTICE: If not abide them strictly, it may cause slight or medium damage to the unit or
the people.
This sign indicates that the items must be prohibited. Improper operation may cause
severe damage or death to people.
This sign indicates that the items must be observed. Improper operation may cause
damage to people or property.
WARNING
！

Do not place the gasoline or other flammable substances close to water heater;
otherwise it may cause fire accident.

The water temperature displayed on the wired controller of water tank refers to the
temperature around the measuring point. Generally, the outlet water temperature is
higher than the value displayed on the screen. To avoid scald, please firstly discharge
cold water and then adjust to your desired temperature.

The power switch of water heater shall be located at a dry position out of the water spray.
Never operate the power switch with wet hands; otherwise electric shock or injury may be
caused.

This product can’t be installed at corrosive, inflammable or explosive environment or the
place with special requirements, such as kitchen. Otherwise, it will affect the normal
operation or shorten the service life of the unit, or even cause fire hazard or serious injury.
As for above special places, please adopt special air conditioner with anti-corrosive or
anti-explosion function.
NOTES
！

Before use of the water heater for the first time after installation, it must be filled with
water before switching on. If energized when the water in the container is not full, the
water heater will occur fault.

In case of any fault to the water heater, it must be repaired by professional after-sales
serviceman. No other person shall dismantle or repair the water heater.

When the child is taking a shower, they must be under the adult’s instructions. Never
allow the child to operate the water heater.

After the power cord is installed, please note to ensure that the power cord should not
direct touch the sheet metal of electric box.

The design pressure is 4.3 MPa. The thickness of pipe for installation should comply with
the relevant national/continental regulations.