background image

6

ORDERING REPLACEMENT PARTS

Replacement parts for the Great Planes FlatOut Turmoil ARF are available using the order numbers in the Replacement
Parts List 
that follows. The fastest, most economical service can be provided by your hobby dealer or mail-order company.

To locate a hobby dealer, visit the Hobbico web site at www.hobbico.com. Choose “Where to Buy” at the bottom of the
menu on the left side of the page. Follow the instructions provided on the page to locate a U.S., Canadian or International
dealer. If a hobby shop is not available, replacement parts may also be ordered from Tower Hobbies at
www.towerhobbies.com, or by calling toll free (800) 637-6050.

Parts may also be ordered directly from Hobby Services by calling (217) 398-0007, or via facsimile at (217) 398-7721, but
full retail prices and shipping and handling charges will apply. Illinois and Nevada residents will also be charged sales tax.
If ordering via fax, include a Visa

®

or MasterCard

®

number and expiration date for payment.

Mail parts orders and payments by personal check to:

Hobby Services

3002 N. Apollo Drive, Suite 1

Champaign, IL 61822

Be certain to specify the order number exactly as listed in the Replacement Parts List. Payment by credit card or personal
check only; no C.O.D.

If additional assistance is required for any reason contact Product Support by e-mail at [email protected],
or by telephone at (217) 398-8970.

Replacement Parts List

Order Number

Description

How to Purchase

Missing pieces ....................................................Contact Product Support
Instruction manual ..............................................Contact Product Support
Full-size plans .....................................................Not available
Kit parts listed below ..........................................Hobby Supplier

GPMP0217 .............Gear Drive Body
GPMG0860 .............Prop Shaft & Spur Gear
GPMG0239 .............Pinion Gear
GPMG0312 .............Replacement Motor
APCQ5016..............10 x 3.8

"

Propeller

GPMQ4620 .............Prop Saver
GPMA2794 .............Hardware Set
GPMG0215 .............Motor/Gear Drive Assembly
GPMQ4618 .............Prop Saver O-ring

Содержание turmoil arf

























Отзывы: