Great Plains Manufacturing, Inc.
Important Safety Information
3
2019-03-12
195-068M
Transport Machinery Safely
Maximum transport speed for drill is 20 mph (32 kph).
Some rough terrains require a slower speed. Sudden
braking can cause a towed load to swerve and upset.
Do not exceed 20 mph (32 kph). Never travel at a speed
which does not allow adequate control of steering and stop-
ping. Reduce speed if towed load is not equipped with
brakes.
Comply with national, regional and local laws.
Follow your tractor manual recommendations for maxi-
mum hitch loads. Insufficient weight on tractor steering
wheels will result in loss of control.
Carry reflectors or flags to mark drill in case of breakdown
on the road.
Keep clear of overhead power lines and other obstructions
when transporting. Refer to transport dimensions under
“
Check for Overhead Lines
Drill markers contacting overhead electrical lines can
introduce lethal voltage levels on drill and tractor frames.
A person touching almost any metal part can complete
the circuit to ground, resulting in serious injury or death.
At higher voltages, electrocution can occur without direct
contact.
Avoid overhead lines during seed loading/unloading and
marker operations.
Wear Protective Equipment
Wear protective clothing and equipment.
Wear clothing and equipment appropriate for the job. Avoid
loose-fitting clothing.
Because prolonged exposure to loud noise can cause hear-
ing impairment or hearing loss, wear suitable hearing pro-
tection such as earmuffs or earplugs.
Because operating equipment safely requires your full
attention, avoid wearing entertainment headphones while
operating machinery.
