manualshive.com logo in svg

GREAT PLAINS 3S-3000HD, Руководство оператора

Поделиться
Скачать
GREAT PLAINS 3S-3000HD Скачать руководство пользователя страница 45

Great Plains Manufacturing, Inc.

Table of Contents Index

Operating Instructions

41

2019-03-12

Table of Contents Index

195-068M

3. During planting (drill lowered and moving forward), 

the display blanks (goes dormant), but area tally 

continues.

4. When raised for turns, obstructions and transport, 

the clutch disengages, the shaft stops, and the meter 

counts no additional (non-planting) rotations.

5. Whenever shaft rotation stops, the LCD display acti-

vates after 30 to 60 seconds, and remains visible for 

30 to 45 minutes.

6. At the completion of planting, record the final reading 

or the grand total. If the display goes dormant before 

you can read it, see “

Dormant Display

”.

7. Subtract the reading at Step 1 from the reading at 

Step 6 for the total planted in the present session.

Dormant Display

Refer to Figure 37

To conserve power, the LCD display blanks itself most of 

the time. If you need to read the display after it has 

“timed out” and gone dormant:
• use the calibration crank to turn the jackshaft once, or
• gently tap or wave a magnet at either of the Great 

Plains logo spots   on the lower region of the display. 
Be careful not to scratch the window.

FigureSpacer

Figure 37

Meter Display (Acres)

29130

1

1

Содержание 3S-3000HD





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды