GrayWolf IAQ SURVEYOR II, Руководство по эксплуатации

Страница: 82 / 100

82
MAN IAQ Surveyor Issue 11 2004
Warning
Ref.
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
Warning Text
Sensor Failed to Zero
Unable to Log. Log is Full
Unable to Add New Site/Loc. List
is Full
Unable to Add New Site/Loc. List
is Full
Unable to Add New Site/Loc. List
is Full
Site/Loc. Exists. Please Enter
New Name
Name is Blank. Please Enter
New Name
Site Exists. Please Enter New
Name
Name is Blank. Please Enter
New Name
No data is logged at this
location.
Table 3 Summary of the Warning Messages
Reason for Warning
Displayed when a sensor cannot
be zeroed (Quick Cal), either
because of a faulty sensor or the
sensor output is not within the
zeroing range.
Displayed when the log memory
is full and either the
LOG
or
STORE
button is pressed.
Displayed when the combined
number of Sites and Locations
is at a maximum, and the
LOG
button is pressed to initiate
logging to a new Site or Location.
As Warning 1003, but the
STORE
button is pressed.
As Warning 1003, but Menu
mode is used to try to add a new
Site or Location.
Displayed if you try to add a Site
(or Location at a Site) that already
exists.
Displayed if you try to add a blank
name as a Site or Location.
Displayed if you try to rename a
Site (or Location at a Site) the
same as one that already exists.
Displayed if you try to rename
a Site or Location with a blank
name.
Displayed if you try to view log
data from a Location where data
has not been logged or has been
deleted.
Refer To
Section
6.3
4.1
4.2.3
4.2.3
4.2.3
4.2.3
4.2.7
4.2.3
4.2.3
4.4.2
7. MAINTENANCE PROCEDURES