GrayWolf IAQ SURVEYOR II, Руководство по эксплуатации

Страница: 54 / 100

54
MAN IAQ Surveyor Issue 11 2004
4. DATALOGGING FACILITIES
(4)
Navigate to the required Site or Location as detailed in
Section 4.2.6.
(5) Press
F1
to display the alphanumeric selection screen.
Change the name of the Site or Location as described
in Section 4.2.7.
Note: When the name of a Location is changed, any existing
logged data remains available under the new name.
4.2.3 Adding a New Site or Location Reference
(1) Press
MENU/METER
to display the Main Menu
screen.
(2) Highlight
Data Logging
and press
ACCEPT
to
display the Data Logging screen,
Select Site/Loc
is
highlighted.
(3) Press
ACCEPT
to display the Select Site/Loc screen.
Note: This screen is also accessed by pressing LOG or
STORE when the Measurement screen is displayed
and pressing F1 to change the site location (refer to
Section 4.3).
(4) To add a Site, highlight one of the existing Sites. To
add a Location, navigate to an existing Location at the
required Site (see Section 4.2.6).
(5) Press
F1
to display the Add Site/
Loc alphanumeric screen. Add a
new Site or Location reference as
described in Section 4.2.7.
(6) Press
ACCEPT
to con fi rm the addition.