GrayWolf IAQ SURVEYOR II, Руководство по эксплуатации

Страница: 60 / 100

60
MAN IAQ Surveyor Issue 11 2004
4. DATALOGGING FACILITIES
restricted number of options.
c. the logging interval, the measurement units or the
alarm levels cannot be changed. During a continuous
logging session, a sensor cannot be calibrated or
disabled, or a Site or Location
deleted.
d. a probe may be changed while
datalogging but this will stop the
current session and start a new
session.
(1) Press the
LOG
button to start logging.
(2) Press
ACCEPT
to con fi rm the measurements are to
be stored against the default Site/Location, to start
logging and to return to the Measurement screen (the
LOG
symbol is displayed).
Note: The LOG symbol is extinguished each time a reading
is being stored.
Data is logged at each default logging interval (see
Section 4.3.5).
(3) Alternatively, press
F1
to navigate to another reference
(see Section 4.2.6) or to add a new Site or Location
(see Section 4.2.3).
(4) Press
LOG
to end the logging session.
(5) Con fi rm the end of the logging session by pressing
ACCEPT
, or
CANCEL
to continue logging.
4.3.4 Using the Data Logging Autostart Facility
ppm CO
2
ppm CO
L
O
%RH
434
7.2
45.6
81.0