CWT22 USER AND SERVICE MANUAL
Revision: 03/2018 Page: 8
H o L d 3
: Stable hold (when held can press any key to cancel)
H o L d 4
: Stable hold (when held can auto cancel at zero)
1. Press the key to access to hold function configuration.
2. Use the key to select the desired mode.
3. Press the key to confirm.
Remarks:
H o L d 1
:
1. Press the key will show
P C T 0 0 2
2. Use the keys and to move cursor and press the to select
number, this can set the range from 001 ~ 100 units of the animal hold.
3. Press the key will show
T i M E 8
4. Use the key to select 1,2,4,8,16,32 or 64 times within the hold range.
5. Press the key to confirm.
U F - 6
RS-232 Output
1. Press the key to enter.
2. The display will show
2 3 2 1
.
3. Press the key to select the modes.
4. Press the key to confirm,and will show
b 9 6 0 0
.
5. Use the key to select the baud rate.
6. Press the key to confirm.
Modes:
232 0
: RS-232 disable
232 1
: Stable output
– Format 1
232 2
: Stream output
– Format 1
232 3
: Manual output
– Format 1
232 4
: Stable output
– Format 2
232 5
: Stream output
– Format 2
232 6
: Manual output
– Format 2
232 7
: Manual accumulate output
– Format 3
232 8
: Auto accumulate output
– Format 3
232 9
: Manual accumulate output
– Format 4
232 10
: Auto accumulate output
– Format 4
232 11
~
232 13
: LP50 printer is used
