CWT22 USER AND SERVICE MANUAL
Revision: 03/2018 Page: 1
Important Safety Information
READ ALL INSTRUCTIONS BEFORE USING SCALES TO ENSURE MAXIMUM
SAFETY, BEST PERFORMANCE, AND TO GAIN KNOWLEDGE OF OUR SCALE,
IT IS ESSENTIAL THAT YOU OR ANY OTHER OPERATOR OF THE SCALE READ
AND UNDERSTAND THE CONTENTS OF THIS MANUAL BEFORE OPERATING
THE DEVICE.
When using an electrical device, basic precautions should always be followed,
including the following:
1.
Please use only the original power cord or DC adapter supplied with the scale.
Other cords or adapters may damage the scale.
2.
DC adaptor is used to charge the battery, and scale can operate without DC
adaptor.
3. Avoid using long power extension cords
– this may cause interference
4. Do not use on surfaces or in areas where vibration, air movement or
temperature change.
Do not place in direct sunlight or near air conditioning vents.
5.
Avoid high humidity (greater than 80%) that might cause condensation and
keep away from direct contact with water and other corrosive chemicals.
6.
Static may influence the weighing result. To reduce the static, wipe the pan an
d scale with anti
‐
static wipes.
7.
Don’t impact or drop heavy objects on the scale – this may affect accuracy, or
cause damage.
Do not stack material on the scale when it is not in use.
8.
Battery should be removed if the scale is not used for a long period of time.
Battery should be recharged every 3 months.
9. Place items to be weighed as close to center of the pan as possible
10. Only use fingers to operate the keypad. Do not press with hard or sharp
objects.
