CWT22 USER AND SERVICE MANUAL
Revision: 03/2018 Page: 5
To program check weighing High / Low conditions (see
UF-2
remarks)
To accumulate weights, the max of the weight times is 9999
To introduce sample value.
To recall accumulated weight
To enter in counting pieces function.
To clear accumulated weight
Backlight
To clear data
BASIC FUNCTION OPERATION
CWT22 can be used for weighing, counting, and check weighing (HI-OK-LO). For
weighing, press UNITS key to select unit to kg, lb, or oz, that is set up by LF-2. Use a
container if necessary and press zero or tare key. Press PT key to enter the known
weight of your container to pre-tare. Finally, add the content and get a net weight.
To use CWT22 as a counting scale, press UNITS key to select pcs. (Check LF-2 to
enable piece counting), or press to enter counting mode. There are two
methods to perform sampling.
A): Press to select number of samples as 10, 20, 50, 100, and 200. Using
this method, no other number can be used. Press to confirm the selection
and complete sampling process.
B): Press to enter any number of samples. The display shows
C 0 0 0 0 0
p c s
