CWT22 USER AND SERVICE MANUAL
Revision: 03/2018 Page: 4
Key DESCRIPTION
Press and hold this key for 2 seconds to turn off the balance.
Press this key to turn on the balance
UNITS
To select the desired weight unit.
ESC
To exit from setup mode.
ZERO
To reset the weight to “0”, but the display value has to be
lesser than ± 2% of maximum capacity.
To move one space to the left or downward in setup mode.
TARE
To subtract the container´s weight.
To move one space to the right or upward in setup mode.
N/G
To view gross or net weight when the balance is on tare status.
All other keys will be disabled when gross weight is activated.
To increase value in setup mode.
Manually transmitting data through RS232 to print.
Confirmation in setup mode.
Pre-TARE
. If you know the weight of the container, press this key and
input the container weight value, then put the goods into the container,
the display will show the net weight only. When there is no content on
the scale, press this key again to clear pre-tare.
To set the value of high limit
To set the value of low limit.
