background image

 

GB - 9

Avoid operating across slopes or on slopes 
that exceed 10°.

NEVER travel with attachment raised.

ALWAYS operate with both feet on 

platform.

• When dismounting, disengage all attachments, shut 

off engine, lower attachment, and remove key.

NEVER carry passengers or children.

Keep people and pets away when 
operating machine.

ALWAYS secure attachments with latch pins.

Look down and behind before and while backing.

Observe and know immediate surroundings when 
operating.

Keep ALL safety devices in place.

Set cylinder lock when servicing with lift arms 
raised.

ALWAYS operate controls smoothly.

Escaping hydraulic oil can penetrate skin, 
causing injury.

Before servicing hydraulics, relieve all hydraulic 
pressure.

Check interlock system per manual before use.

 

2.

 

    

 

WARNING!

 

 

NEVER stand under or work under raised 
lift arms if cylinder lock is not engaged.

ALWAYS engage cylinder lock when 
servicing or working under raised lift arms.

 

3.

 

    

 

DANGER!

 

 

PINCH POINT - Keep fingers, arms, and 
hands away from this area.

 

4.

 

    

 

DANGER!

 

 

 

ROTATING FAN

 

 (Diesel Models)

Keep fingers, arms, and hands away from 
this area.

 

5.

 

    

 

DANGER!

 

 

 

HOT SURFACES

 

 

DO NOT TOUCH parts which are hot from 
operation. Always allow parts to cool.

 

6.    Hearing Protection

 

Always wear adequate hearing protection.

 

7.

 

    

 

CAUTION! 

 

When using the standard bucket, don’t 

lift more than 300 lbs. (136 kg).

 

NOTE: 

 

Optional weight kit will increase lift capacity.

OK0190

OK0200

OK0210

OK0220

OK0230

OK0320

OK0310

OK0340

OK0230

OK0360

OL4690

Содержание Skidster 200



































Отзывы: