background image

 

GB - 11

NEVER operate unit after or during the use of 
medication, drugs or alcohol. Safe operation requires 
your complete and unimpaired attention at all times.

NEVER allow anyone to operate the unit when their 
alertness or coordination is impaired.

DO NOT operate unit without wearing adequate outer 
garments. Wear adequate safety gear and protective 
gloves. Wear proper footwear to improve footing on 
slippery surfaces.

Protect eyes, face, and head from objects that may be 
thrown from unit. Wear appropriate hearing protection.

Avoid sharp edges. Sharp edges can cut. Moving parts 
can cut or amputate fingers or a hand. Wear gloves to 
service unit when handling sharp edges.

ALWAYS keep hands away from any pinch points.

ALWAYS keep hands and feet away from all moving 
parts during operation. Moving parts can cut off body 
parts.

DO NOT touch unit parts which might be hot from 
operation. Allow parts to cool before attempting to 
maintain, adjust, or service.

Keep the operator platform free of dirt, grease, or mud. 
NEVER place feet under the platform.

Do not tie yourself to the unit.

 

Controls

 

Stop completely before reversing.

Never jerk the control levers. Always use a steady, even 
action to achieve smooth control.

When using attachments, ensure that they are 
attached correctly with latch pins engaged. Practice the 
operation before beginning work.

Always be aware of obstructions that may cause injury 
to operator or damage to the unit.

Avoid loss of control or tipping. Do not carry a load with 
the lift arms raised. Always carry load close to ground. 
Do not step off the platform when lift arms are raised.

Always ensure there is ample overhead clearance.

Keep alert with eyes fixed in direction of travel.

Do not travel with the arms in the raised position.

 

Maintenance

 

ALWAYS maintain unit in safe operating condition. 
Damaged or worn out muffler can cause fire or 
explosion.

Check the condition of the unit at the end of each day 
and repair any damage.

ALWAYS block wheels and know all jack stands are 
strong, secure and will hold weight of unit during 
maintenance.

When performing service which requires arms to be 
raised, make sure cylinder lock is engaged and secure.

Keep nuts and bolts tight and keep equipment in safe 
operating condition.

Shut off engine before maintenance, adjustments, or 
service (except where specifically recommended).

Allow hot parts to cool.

Keep unit free of dirt, stones, and other debris. Clean 
up oil or fuel spills.

 

Storage

 

DO NOT store unit with fuel in the fuel tank inside a 
building where any ignition sources are present. Allow 
unit to cool completely.

ALWAYS clean unit before extended storage. See 
Engine Manual for proper storage.

 

Battery

 

Avoid Electric Shock. DO NOT reverse battery 
connections.

Explosive Gases! Poisonous battery fluid contains 
sulfuric acid. Contact with skin, eyes, or clothing can 
cause severe burns.

Battery posts, terminals and related accessories 
contain lead and lead compounds, chemicals known in 
the State of California to cause cancer and 
reproductive harm. Wash hands after handling.

No flames. No sparks. No smoking near battery.

Always wear safety glasses and protective gear near 
battery.

DO NOT TIP battery beyond a 45

 

o

 

 angle in any 

direction.

ALWAYS KEEP BATTERIES OUT OF REACH of 
children.

 

Transport

 

Use extra care when loading or unloading unit onto 
trailer or truck. Secure unit chassis to transport vehicle. 
NEVER secure by rods or linkages that could be 
damaged.

Always use the lifting lug at the top of the unit. Lift the 
unit with an appropriate crane on the construction site.

Always use the tie-down lugs provided on each side of 
the unit to secure the unit when transporting by truck or 
trailer.

DO NOT transport with attachment in raised position.

Lower attachment when unit is parked or stored unless 
the cylinder lock is used.

 

Attachments and Accessories

 

Use only attachments or accessories designed for your 
unit.

To prevent tipping, DO NOT drive unit without 
attachment when weight kit is installed. ALWAYS 
remove weight kit when removing attachment. 
ALWAYS install weight kit when installing an 
attachment that requires weight kit.

Содержание Skidster 200



































Отзывы:

Похожие инструкции для Skidster 200