66
The charge mode and the start delay time parameters are
programmed.
Tap the box to activate (blue).
Tap the DEC/INC button to select the desired mode.
Discharge modes are explained below After counting down,
the charger initiates the discharge process.
Tapping the Enter
button will cause the charger
to immediately initiate
the charging process.
Cycle charge discharge mode of the POLARON PRO Charger
LiPo, LiIon, LiFe, Pb
CC-CV
Normal charge mode.
NORMAL
Normal discharge mode.
LINEAR
The preset current is maintained throughout the dischar ge process.
NiCd, NiMH
AUTO
The charge will automatically adjust the charge/discharge conditions.
NORMAL
Normal charge/discharge.
LINEAR
The preset current is maintained throughout the charge/discharge
process.
15.3 Cycle operation mode per battery type
CHARGE MODE SELECTION IN CYCLE MODE
DISCHARGE MODE SELECTION IN CYCLE MODE
START DELAY TIME
BATTERY CELL CHECKING
This page (left) shows the battery check process after a connection to
the balancer has been established. The next page is accessed
automatically.
Tapping the Enter
button will cause the charger
to immediately initiate the charging
process.
The start delay time can be set at values betwee 1-150 minutes.
After the preset delay time has completed, the charger initiates the cycle
charge/discharge.
