8.
MENU
Graupner/SJ POLARON Series chargers are equipped with a highly sensitive touch screen. Touch the icons to access
every mode and set up your device.
8.1 Action buttons
ESC button:
Return to the previous page, store the setup data, etc.
DEC button:
Page transition, data setup, etc.
INC button:
Page transition, data setup, etc.
ENTER button:
Go to the next page, Complete the data setup,
Start / complete the operation, store the setup data, etc.
8.2 Menu description
Main page
Function
PROFILE
Battery name, type, capacity, number of cells, memory number, memory copy.
CHARGE
Setup the battery charge data.
DISCHG
Setup the battery discharge data.
CYCLE
Setup cycle type and delay the time of charge/discharge (using the charge/discharge setup data).
BALANCE
Display the cell voltage and related data. Setup the balance data.
DATA
Display the completed data and battery status.
MISC
Setup servo, motor and warmer data, E.S.C seting.
USER SET
Setup input data, warning, date, time, user name and etc.
9.
BATTERY CONNECTION
POLARON PRO 2CH DC chargers have two sets of outputs on the front of the charger. Channel 1 is on the left. Channel
2 is on the right. Each channel has two 4mm banana sockets with a 7 cell balance port and a temperature sensor input
port. An appropriate charge lead must be selected to match the specific connector on your battery.
The charge leads must be connected to the 4mm output sockets on the specific charger channel, with the positive (+)
lead connected to the red socket and the negative (-) lead connected to the black socket.
Only connect the battery to the charge lead AFTER the charge lead has been connected to
the charger, as the connectors on the charge lead could touch together and cause the battery
to short circuit.
During the charging of a Lithium pack, the balance lead MUST be connected to the charger.
The charger has a ‘JST-EH’ type balance port, but also comes with other balance adaptor boards.
To use an adaptor board, connect the supplied balance adaptor board lead to the charger.
Then, connect the board using the appropriate battery balance connector. This balancing
connector is essential. Without connecting the balancing connector to the balancing port on
52
