83
A No Battery error message indicates that there is no battery
connected to the charger.
A Reverse Polarity error message indicates that the battery is plugged
in “backwards”, inverting the positive to negative connections.
An Open Circuit error message indicates that
the charging/discharging battery has been disconnected.
During an operation.
A Short-Circuited error message may indicate multiple errors,
including faults at the charger output leads, at the battery leads,
within the battery and locations on the cables, causing the short
circuit.
A Low Output-Volt error message indicates that either the voltage
setup is below the requirements for the charging/discharging battery
or the number of cells has been improperly selected.
A High Output-Volt error message indicates that either the out
voltage setup exceeds the requirements for the charging/discharging
battery or the number of cells has been improperly selected.
A Temp. Sensor error message indicates that the temperature sensor
either is plugged in “backwards” with the positive to negative
connections inverted or has a fault inside the sensor.
