15.
CYCLE PAGE
Tapping the CYCLE icon on the main page will access the cycle mode. Tapping the data box will activate this parameter
(blue). Tapping the DEC/INC buttons will access the program
for the parameters.
Tap the CYCLE icon on the main page to access
the cycle mode
Tapping the part in the red circle will activate (blue) this parameter, allowing
this value to be programmed. The parameters entered into the Charge and
the Discharge mode are used to set the charge/discharge current during
the operations.
Tapping the Enter button will access the next page
1) Operating sequence of the cycle mode
C > D - Dischar ge after the charge
D > C - Char ge after the discharge
D:C > D - 1 time dischar ge: Discharge after the charge
2) Cycle - The number of operating cycles ( 1-10 times)
3) C->D Delay - Time interval after the charge (1-30min)
4) D->C Delay - Time interval after the discharge (1-30min)
15.1 LiPo, Lilon, LiFe, NiCd, NiMH, Pb battery cycle pages
The charger determines if there is a connection
to the balanceboard.
This determination is an automatic process.
The parameters entered into the Charge and Discharge modes
are used in the charge/discharge processes.
These values can be changed.
15.2 LiPo, Lilon, LiFe, NiCd, NiMH, Pb battery cycle processes
65
