GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
We reserve the right to introduce modifications. Not liable for printing errors!
11/2011
9
For the wire undercarriage units you will need to file away the inside of the two
fairings a bit. When installing the fairings, make sure that the wheel covers face
outwards. The wheels can now be attached to the axles using collets and grub
screws. Apply UHU thread-lock fluid to the grub screws to prevent them working
loose. Loosen the grub screw at the front of the shock absorbing strut, loosen, and
push the wheel axle to the other side. Re-tighten the grub screw.
The wheels and wheel fairings must be aligned exactly parallel with the fuselage
centreline.
The final stage on the wing is to install the landing searchlight.
As shown in the following photographs, fit the two LEDs in the white plastic holder
and secure them with a little UHU Power all-purpose adhesive.
Trim the outside edges of the plastic holder so that it fits in the recess in the wing.
Route the connecting leads of the two diodes to the root rib using a piece of thread,
and run them out of the drilled access hole. The plastic holder can now be glued in
using UHU Power all-purpose adhesive. Fix the glazing to the wing using clear
adhesive tape.
