GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
We reserve the right to introduce modifications. Not liable for printing errors!
11/2011
7
As shown in the photo, secure the hinges for the landing flaps using heat-shrink
tubing.
On the underside of the wings, there are markings indicating where the flap hinges
can be screwed in. Make sure that the axes of rotation of the hinges are all the same
distance from the trailing edge of the wing.
As shown in the photo at the left, a screw is used to
fix the hinges in place; then use an engineer's square or geometric protractor for
alignment with the trailing edge, and fasten the hinges with two more screws. Now
push the landing flaps up against the wings and tape them in place temporarily; align
them, and fasten them with screws.
Screw the pushrods together as shown in the following photos.
