GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
We reserve the right to introduce modifications. Not liable for printing errors!
11/2011
10
Fuselage with tailplane, vertical stabiliser, and nose gear
The vertical stabiliser can either be glued permanently to the fuselage or fastened
removably using four screws.
Only the fastening of the vertical stabiliser using screws is described.
Before putting in the screws, the two extension cables for the two elevator servos
must be pulled into the fuselage.
Use the Ø 12 mm aluminium tube to put the horizontal stabiliser onto the fuselage to
test the fit; the two extension cables must be routed through the openings of the
horizontal stabiliser on the right and left.
The two halves of the tailplane must be attached to the fuselage using the Ø 12 mm
aluminium tube and four M3x16 Allen screws each.
