GRAUPNER/SJ GmbH D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors.
02/2014
6
Cut out the individual decals from the transfer sheet, and apply them to the model in
the arrangement shown in the drawing. Note that the decals must be slit along the
control surface hinge lines, otherwise the control surfaces will jam. The windscreen is
supplied in three parts so that it can be applied to the model without creases.
Control surface travels
The model is designed to produce the correct control surface deflections when servo
travel is set to the default value of about 100%. The actual values are as follows, in
