GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler Ident. # 0059166 11.2008
36
Material
Typical joint
Adhesive
Order No.
GRP to
Fuselage to retract
UHU plus endfest 300
plywood
unit formers
Order No. 950.43
GRP to
Fuselage to aero-tow
UHU plus endfest 300
aluminium
mechanism
Order No. 950.43
Areas of the fuselage which are to be glued must be rubbed down with fine-grit
glasspaper to remove any lingering traces of mould release agent. Carefully remove
all sanding dust. Aim at reducing the glossy surface to a
matt
finish, otherwise there
is no chance of a durable glued joint between the fuselage and other parts.
When using adhesives it is important to observe the instructions supplied by the glue
manufacturer. The main Graupner FS catalogue includes many other types of
adhesive.
When you are using solvent-based glues be sure to provide good ventilation in your
workroom.
Read the adhesive manufacturer’s instructions.
Radio control system
We particularly recommend computer radio control systems, from the mc-12 to the
mc-24.
Recommended servos:
Rudder
DS 8077
Order No. 5149
1 required
Elevator
DS 3068
Order No. 5188
1 required
Ailerons
DS 3068
Order No. 5188
2 required
Airbrakes
C 351
Order No. 5123
2 required
Aero-tow release
DS 8077
Order No. 5149
1 required
Retractable wheel
DS 8077
Order No. 5149
1 required
We recommend the DS 19 or SMC 19 receiver, or the XR-20 iFS unit.
Order No. 3050
Power switch harness
1 required
Servo extension leads
Order No. 3935.105
for elevator
1 required
Order No. 3935.18
for connecting servo leads to receiver
2 required
Order No. 3935.32
for connecting servo leads to receiver
2 required
Order No. 98516.1
Folding ferrite ring for aileron and
airbrake servos
1 required
Order No. 1587
Velcro cable-tie
1 pack