GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
We reserve the right to introduce modifications. Not liable for printing errors!
12/2011
7
With servo and rudder in neutral position, screw together the lengths of the rods for
the ailerons, landing flaps, and elevators, adjust them, and use thread lock fluid (such
as UHU schraubensicher) and lock nuts to secure them against loosening.
As shown in the photo, secure the hinges for the landing flaps using heat-shrink
tubing.
On the underside of the wings, there are markings indicating where the flap hinges
can be screwed in. Make sure that the axes of rotation of the hinges are all the same
distance from the trailing edge of the wing.
As shown in the photo at the left, a screw is used to fix the hinges in place; then use
an engineer's square or geometric protractor for alignment with the trailing edge, and
fasten the hinges with two more screws. Now push the landing flaps up against the
wings and tape them in place temporarily; align them, and fasten them with screws.
