GRAUPNER/SJ GmbH 73230 KIRCHHEIM/TECK GERMANY
Subject to modification! No liability for printing errors!
03/2018
-
9
-
Glue the molded part (15), sand the edge of the fuselage and glue the fuselage head
(16). Use a special nut (17) to glue the tail plane support (18).
Glue the rudder made of parts (19) to (21) using cyano adhesive, please note the
section D-D on the construction plan sheet 1 and do not use an activator spray. Grind
the rudder according to section D-D and check that the rudder is easy to move. Insert
the finished rudder first into the fuselage. Check the fuselage from the front to see if it
fits exactly vertically, then glue it in place.
