background image

GRAUPNER/SJ GmbH 73230 KIRCHHEIM/TECK GERMANY 

Subject to modification! No liability for printing errors! 

03/2018 

 

2

 - 

Introduction

 

Thank you very much for purchasing a Graupner 

AMIGO V

. This 

R/C glider model

 is 

extremely versatile. 

Read this manual carefully to achieve the best results with your 

AMIGO V

 and first of 

all to safely control your models. If you experience any trouble during operation, take 
the instructions to help or ask your dealer or 

Graupner

 Service Centre. 

Due to technical changes, the information may be changed in this manual without 
prior notice. Be always updated by checking periodically on our website, 

www.graupner.de

 to be always uptodate with the products and firmware. 

This product complies with national and European legal requirements. 

To maintain this condition and to ensure safe operation, you must read and 
follow this user manual and the safety notes before using the product! 

Note

 

This manual is part of that product. It contains important information 
concerning operation and handling. Keep these instructions for future 
reference and give it to third person in case you gave the product. 

 

 

Service centre 

Graupner Central Service 

Graupner/SJ GmbH 
Henriettenstraße 96 
D-73230 Kirchheim/Teck 

 
 
 
 
Graupner in Internet

 

For the service centres outside Germany please refer to our web site 

www.graupner.de 

 
 
 
 

Servicehotline

 

 (+49) (0)7021/722-130 

Monday - Thursday:  
9:15 am - 4:00 pm 
Friday:  
9:15 am - 1:00 pm 

 [email protected] 

Содержание AMIGO V

















Отзывы: