background image

Safety and Warnings

Thrown objects

Mowing with power equipment involves certain risk including but not limited to thrown objects. Be sure to clean up 

the area to be mowed and remove objects that could be thrown by the blades BEFORE you start mowing

Once the grass flap is installed your mower will be equipped with an operator controlled discharge chute (OCDC). 

Do not operate the mower if the OCDC is not properly attached. This discharge chute has a variable adjustment 

from fully open to fully closed. In the closed position it will serve to keep some of the clipping material under the 

mower deck for a longer period of time, in order to enhance the mulching capabilities, as well as function as a 

safety shield. The discharge chute should ALWAYS BE IN THE CLOSED POSITION WHEN MOWING WHILE 

PEOPLE ARE PRESENT IN THE IMMEDIATE VINCINITY.

Do not allow anyone in the area while mowing. If someone does enter the area, stop mowing immediately until they 

leave.

Moving parts

The mower deck has spinning mower blades that can amputate hands and feet. Do not allow anyone near the 

mower while it is running! Keep safety devices (guards, shields, and switches) in place and working.

Children

Tragic accidents can occur with children. Do not allow then anywhere near the area of operation. Children are 

often attracted to the unit and mowing activity. Never assume that children will remain where you last sat them. If 

there is a risk that children may enter the area where you are mowing, have another responsible adult watch them.

General Safety Precautions

1. Do not mow when children, pets, or others are present. The operator is responsible for the safety of others 

within the vicinity of the operation of your mower.

2. Keep hands, feet, and clothing away from rotating blades or other rotating parts while the engine is 

running.

3. Do not attempt to open or close the flap at the discharge chute while the engine is running, doing so 

could result in personal injury including loss of hands, feet or death.

4. Clear work area of objects (wire, rocks, and debris of any kind) that can be picked up and thrown by the 

mower, and possibly damage the equipment or cause personal injury to the operator.

5. Do not attempt to adjust or repair the mower deck, grass flap, or related components while the engine is 

running. You must disengage power to attachments, disengage PTO, set parking brake, set steering 

controls to neutral, shut off the engine, and remove the key before making anyrepairs or adjustments or 

attempting any of the following tasks:

a. Flap connecting linkage adjustment

b. Flap removal or cleaning

c. Unclogging the chute

Failure to comply can result in personal injury, loss of limb, or death.

6. Keep all nuts, bolts, screws, and other fasteners in place and properly secured to be sure 

equipment is in safe working condition.

7. Keep equipment and attachments in good operating condition and keep safety devices, suchas guards, 

shields and covers in place and working.

8. Do not operate the mower or attachments if any guards are missing or not functioning.

9. Stop the mower and attachments, secure the mower, and inspect for damage after striking a foreign 

object. Repair any damage before restarting and operating the equipment.

10. Use personal protective equipment when operating mower of performing maintenance, such as(but not 

limited to) protection for eyes, feet, and head. Do not operate or service the mower when barefoot or 

wearing open-toed sandals.

11. Obey all safety decals.

GrassFlap.com   

 

 

Phone: (502)594-3546 

 

 

 

 

       13

Содержание 49K















Отзывы: