GRASS VALLEY zodiak, Руководство пользователя

Страница: 367 / 458

Zodiak User Manual 367
E-MEM Operations
Note Unlike Grass Valley 4000 switchers, Zodiak systems allow keyframe Inserts
between keyframes. When you change Master E-MEM delegations, the effect
time cursor does not move, so it may be between keyframes on the newly del-
egated M/E. On a 4000 switcher, since this location is not on a keyframe you
would be prevented from inserting, but a Zodiak system allows this. When
using 300 mode, check that you are at the correct location in the effect on a
newly delegated M/E before you insert any keyframes.
6.
Select the individual M/E registers you wish to recall together on each
individual M/E E-MEM subpanel involved.
7.
Delegate the Master E-MEM subpanel to the desired M/Es, press the
Master E-MEM
Learn
button, then select the bank and register on the
Master E-MEM subpanel to which you wish to save those settings.
8. Repeat the above step for all the combinations of M/E effects you wish
to recall together, being sure to Learn them to different Master E-MEM
registers.
9.
To recall any of the desired combinations of M/E effects, simply press
the appropriate Master E-MEM bank and register keypad buttons. You
can use
Auto Recal
l to automatically delegate the levels involved in that
effect.
Note In 300 Mode, if an empty M/E register has work buffer values set but they
haven’t yet been learned on that individual M/E, performing a Learn on
Master E-MEM will not save those settings to that register. Only the register
number is saved for that Master E-MEM register in 300 Mode. There is no
indication of this except the register will continue to report itself empty on the
E-MEM readout displays.
E-MEM and Macro Interaction
Macros and E-MEMs can interact in two fundamentally different ways. An
E-MEM can be programmed to execute one or more macros, or a macro can
be created that recalls one or more E-MEMs. With care, operating both
control mechanisms together can be extremely powerful. However,
improper use can create infinite loops or other undesirable behavior. It is
especially important that your Zodiak system be loaded with the correct
E-MEMs and Macros and is operating in the correct mode, or unpredictable
system behavior will result from the mismatched E-MEMs and macros.
Macros in an E-MEM
A macro can be added to an E-MEM keyframe and be executed when that
E-MEM register is recalled and run. Only the macro register number (and
its Enabled state) is saved to the E-MEM register, not the actual macro com-
mands. If a macro is subsequently changed, any E-MEM specifying that
macro register will run the modified macro.
See E-MEM Recalls in a Macro on page 420 for related information.