GRASS VALLEY zodiak, Руководство пользователя

Страница: 130 / 458

130 Zodiak User Manual
Section 3 — Control Surface Description
Effect Dissolve Button
The
Effect Dis
button is used to specify an effect dissolve from the current
state of the work buffer to the first key frame of a new register (see Effect
Dissolve on page 66 ). This prefix button modifies Learn and Recall opera-
tions.
Any register can be recalled as an effect dissolve with the following proce-
dure. This is useful for testing an effect before it is learned as an effect dis-
solve. Parentheses indicate optional use of one of the bank selection
processes described earlier:
Effect Dis
,
(bank selection)
,
register
The
Effect Dis
button goes high tally while the Effect Dissolve is being per-
formed. The effect dissolve rate is one second, unless the register has pre-
viously been learned with a different dissolve rate (see below). Recalling
another register while an effects dissolve is in progress aborts the current
effects dissolve and then performs the recall. Pressing the
Effect Dis
button
while an Effect Dissolve is in progress stops it at that point.
A register may be learned so an Effect Dissolve is always performed when-
ever that register is recalled using the following procedure. This learns a
new state into the register, so you should recall the register involved before
performing this procedure:
Lock/Learn
,
Effect Dis
,
(dissolve rate)
,
(bank selection)
,
register
The
Effect Dis
button may be pressed before
Lock/Learn
if desired. A dissolve
rate can be specified using the
Trans Rate
button for time entry.
An Effect Dissolve learned to a register can be cleared by recalling the reg-
ister, waiting until the effect dissolve completes (the
Effect Dis
button will go
off), and then pressing
Lock/Learn
and the register number to relearn the reg-
ister.
Trans Rate Button
The
Trans Rate
button on the E-MEM subpanel is used to set transition rates
for M/E main and keyer transitions. See Transition Rates on page 113 for
more information.
When either the
Seq
or
Effect Dis
prefix buttons are lit, the
Trans Rate
button
can be used to enter time values in the same format. See Time Value Entry
on page 99 for details.