manualshive.com logo in svg

GRASS VALLEY zodiak, Руководство пользователя

Поделиться
Скачать
GRASS VALLEY zodiak Скачать руководство пользователя страница 234

234

Zodiak User Manual

Section 4 — Menus Overview

 

Timeline Navigation Button Group

Prev 

– This button on the Main panel moves the cursor to the previous 

master timeline keyframe.

Next

  – This button on the Main panel moves the cursor to the next master 

timeline keyframe. 

Begin

 – This soft button in the Timeline – Edit menu moves the cursor to the 

first keyframe of the effect.

End

 – This soft button in the Timeline – Edit menu moves the cursor to the 

last keyframe of the effect. 

These buttons are inactive during effect runs. 

Constant Duration Button

Const Dur

 – This soft button in the Timeline menus, enables Constant Dura-

tion operating mode, in which the overall duration of the effect can be 
retained through editing. Inserting new keyframes between existing key-
frames (on the path) occurs normally in this mode, since this does not 
change the effect duration. Inserting a keyframe on an existing keyframe is 
also permitted in Constant Duration mode, however, even though this does 
increase the duration of the overall effect. (This is different behavior from 
the Grass Valley Group Model 4000 switcher, which did not permit 
inserting on a keyframe in Constant Duration mode). 

Constant Duration mode influences Delete, Cut, Copy, and Paste opera-
tions. For example, if a keyframe is deleted from an effect with 

Cons Dur

 off, 

the time between that keyframe and the next is removed, shortening the 
duration of the effect. If a key frame is deleted with 

Const Dur

 on, the key 

frame data is removed from the effect, but the subsequent key frames do 
not move on the timeline. The duration of the previous keyframe is 
increased to fill the time. 

Timeline Edit Button Group

Delete

 – The 

Delete

 button is only present in the Timeline menus. When the 

cursor is on at least one keyframe, pressing the 

Delete

 soft button deletes the 

keyframe(s) at the current cursor location and removes the duration to the 
next master timeline keyframe. Note that this also deletes the same dura-
tion from other delegated timelines, including those that have the cursor on 
the path. This maintains the relative alignment of all the delegated time-
lines. The deleted keyframe information is not saved. When the cursor is on 
the path on all delegated timelines (not on any keyframe), 

Delete

 is inactive.

Содержание zodiak











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды