manualshive.com logo in svg

GRASS VALLEY zodiak, Руководство пользователя

Поделиться
Скачать
GRASS VALLEY zodiak Скачать руководство пользователя страница 208

208

Zodiak User Manual

Section 4 — Menus Overview

 

Switcher Controls DPM

 is On and 

DPM Controls Aux bus

 is On. 

The switcher changes to the aux bus are sent as a request to the DPM. 
The DPM replies to the switcher with the report of the new source. 
Switcher receives the request and changes the source on the Aux Bus.

Switcher Controls DPM

 is On and 

DPM Controls Aux Bus

 is Off.

Switcher changes to the Aux Bus are immediately applied on the Aux 
Bus and sent as a request to the DPM. The DPM replies to the switcher 
with the report of the new source but the switcher drops the request 
without changing the source on the Aux Bus.

Switcher Controls DPM

 is Off and 

DPM Controls Aux Bus 

is On or Off.

The state of the 

DPM Controls Aux Bus 

button is ignored whenever the 

Switcher Controls DPM

 button is Off. Switcher changes to the Aux Bus are 

immediately applied to the Aux Bus and the request is not sent to the 
DPM. DPM replies to the switcher with report of the new source are 
ignored and dropped without changing the source on the aux bus.

The 

Map

 

Sources

 button accesses the External Mapping menu (

Figure 143

). 

This menu will allow the user to map any or all of the Zodiak sources to 
DPM buttons. The menu does not know how many sources the DPM has 
so it is the responsibility of the user to map the correct number of sources 
based on the protocol used by the DPM device.

Figure 143.  DPM Map Sources Menu

Содержание zodiak











































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды