manualshive.com logo in svg

GRASS VALLEY NV9000, Руководство пользователя

Поделиться
Скачать
GRASS VALLEY NV9000 Скачать руководство пользователя страница 50

42

Operation

Buttons

Panel Lock 

The button prevents accidental changes to the panel settings, especially router crosspoints. 
When the panel is locked, the button array becomes blank except for the Panel Lock button 
which becomes high tally amber. 

The button is a toggle: press the panel lock button again to revert the panel to its previous 
state.

Preset Release 

The button presets the previously routed source to the currently selected destination. To 
restore the previous route, you must next press ‘Take’ assuming you have not changed the 
destination. This function is useful when you make a route in error.

Previous Source 

The button presets the previously routed source to the currently selected destination. To 
restore the previous route, you must next press ‘Take’ assuming you have not changed the 
destination. This function is useful when you make a route in error.

The button does 

not

 restore the previous destination. If you changed the destination and 

press ‘Previous Source’, the take will not restore the previous route.

Salvo 

The salvo button places the panel in 

salvo mode

. In salvo mode, most buttons become 

disabled. In salvo mode, you can scroll through the salvo list assigned to the panel. When 
you find the salvo of your choice, press the ‘Take’ button to execute the salvo. After the 
salvo executes, the panel returns to its normal mode. 

Pressing the salvo button again while the panel is in salvo mode to reset the salvo selection. 
Press any other button (such as ‘Clear’) while the panel is in salvo mode to return the panel 
to its normal mode.

Save Preset 

The ‘Save Preset’ button becomes enabled, in MD mode only, when you have selected a 
preset (or multiple presets) for a destination (or multiple destinations). When the operator 
presses ‘Save Preset’ the panel enters a “save preset” mode where the operator may enter a 
name under which the preset will be saved and which can be used later if the operator 
presses a ‘Load Preset’ button. See 

Saving and Loading Presets

 on page 45. 

The button does not operate in X-Y mode.

Source 

The button selects a specific source. The source name appears in the ‘Preset’ display.

Selecting a source activates the ‘Take’ button, which you must press to complete the route.

Содержание NV9000


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды