GRASS VALLEY NV9000, Руководство пользователя, Страница: 53 / 81

45
NV9608 and NV9616
User’s Guide
Implicit in the ‘Broadcast’ button is the “source is master” mode. It is not necessary to press
‘Source is Master’ repeatedly. The reason you must press ‘Source is Master’ the first time is
that “broadcast mode” is not yet active.
Removing Broadcast Routes
To cancel a route, route the source to another destination normally.
To remove a destination from the set of broadcast destinations, route another source (e.g.,
the free source) to the destination.
Saving and Loading Presets
 This capability is not available for the NV915, although it is fully supported by the
NV920 or NV960.
The NV9616 and NV9608 allow you to save complex multi-destination presets and retrieve
them when needed. The ‘Save Preset’ and ‘Load Preset’ buttons are available for this
purpose.
The concept of saving and reloading presets applies to MD mode only.
The ‘Save Preset’ button is enabled when you have selected at least one preset for at least
one destination. Press the button to enter “save preset” mode in which you can name and
save the presets.
When you press a load preset button, you can select the name of a saved preset and it will
“load.” That means that all the destinations which you had selected and saved become
selected once again and the sources that you had preset for these destinations become
preset once again.
How to Save a Preset
1 (If required) switch to MD mode.
2 Select a destination and preset a source. Repeat, for any other destinations.
3 Press ‘Save Preset’. The panel enters “save preset” mode and the LCD buttons display
the following functions:
Enter a preset description using the functions provided. See Using the Save Preset
Buttons , following. The description is an identifier that you will use later when loading
the preset.
ENTER ENTER
PRESET PRESET
DESC DESC
–––––––– ––––––––
–––––––– ––––––––
–––––––– ––––––––
_ _
ABC ABC CANCEL CANCEL SYMBOLS SYMBOLS NUMERALS NUMERALS
UPPER UPPER
CASE CASE
LOWER LOWER
CASE CASE