manualshive.com logo in svg

GRASS VALLEY NV9000, Руководство пользователя

Поделиться
Скачать
GRASS VALLEY NV9000 Скачать руководство пользователя страница 16

8

Introduction

Additional Control Panel Features

Additional Control Panel Features

The panel supports gang switching in multi-destination mode. The operator may route 
single or multiple sources to multiple destinations in a single operation.

The LCD buttons can be green (for sources), amber (for destinations), yellow, or red. Each 
button provides three levels of tally: off, low, and high. Through the menu, high tally can be 
set at high or medium brightness and low tally can be set at low or medium brightness, 
where high tally is constrained to be brighter than low tally.

The panel’s 24 function buttons and two scroll buttons are backlit. The buttons can be 
green or amber. Each button provides three levels of tally: off, low, and high. (You can adjust 
the levels of low and high tally, through the menu. LED brightness levels range from 0% to 
100%, in 10% increments, with high tally constrained to be brighter than low tally.)

If you assign an X-Y/Multi-Destination button on your panel, it is a toggle: press it once to 
place the panel in X-Y mode and press it again to place the panel in multi-destination 
mode. (It turns green for X-Y mode and amber for multi-destination mode.)

Содержание NV9000


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды