GRASS VALLEY NV9000 Скачать руководство пользователя страница 26

Страница: 26 / 81

Configuration

Panel Options

Panel Options

The panel options section, at the right of the configuration page, has two parts: drop-down
menus and checkbox options. These are the drop-down menus:

These are its drop-down menu options:

Panel Type

XY/Multi-
destination
Modes

The panel configuration allows the operator to switch
between X-Y mode and multi-destination mode at any time.

XY only

The panel configuration is restricted to X-Y mode.

Multi-
destination only

The panel configuration is restricted to multi-destination
mode.

Default Mode

X-Y Mode

Starts the panel in X-Y mode after a reset.

Multi-Dest
Mode

Starts the panel in multi-destination mode after a reset.

Release Mode

Normal Release This panel can release “locks” and “protects” set by the

designated user (at this panel or any other panel).

Force Release

This panel can release locks and protects set by any user.

Default

Destination

None

After a reset, the panel displays no destination device. (This
is not recommended.)

‹device›

The Panel uses the specified device as the destination after a
reset. (The ‘Default State’ button also returns the panel to
this destination.)

Preset Monitor

None

The preset source video is not sent to a monitor.

‹device›

The preset source video for the selected destination appears
on the specified monitor (device).

Status Monitor

None

The current source video is not sent to a monitor.

‹device›

The current source video for the selected destination
appears on the specified monitor (device).

Содержание NV9000


















































































Результаты поиска

Содержание NV9000

Отзывы:

Похожие инструкции для NV9000

Бренды по названию

Популярные бренды

GRASS VALLEY NV9000, Руководство пользователя

Результаты поиска

Содержание NV9000

Отзывы:

Похожие инструкции для NV9000

Бренды по названию

Популярные бренды