GRASS VALLEY NV9000, Руководство пользователя

Страница: 44 / 81

36
Operation
Takes
Press the destination’s LCD button.
 After pressing the destination’s LCD button, you can optionally assign a new desti-
nation to that button. To do so, press ‘Destination Mode’ to begin selection of a
destination. Then, press a category button to choose a destination category. Then
press additional category buttons to append a suffix to the category mnemonic to
generate the destination name. The name of the new destination appears on the
LCD button.
3 Select a source
If necessary, press ‘Source Mode’ to begin selection of a source. Then press a category
button to choose a source category. Then press additional category buttons to append
a suffix to the category mnemonic to generate the source name.
You can also press a dedicated source button if you have one for that source.
The LCD buttons for preset source levels turn yellow. The name of the source appears in
the preset line of those LCD buttons.
4 Press the ‘Take’ button under the destination button.
You could also press a ‘Gang Take’ button (among the function buttons) if you have
one.
Scenario 4 — MD Mode, Multiple Destinations
This scenario requires that your panel have a gang take button.
1 (If required) switch to MD mode.
2 Select a destination.
(Optionally) scroll the MD pages to locate the destination of choice.
Press the destination’s LCD button.
 After pressing the destination’s LCD button, you can optionally assign a new desti-
nation to that button. To do so, press ‘Destination Mode’ to begin selection of a
destination. Then, press a category button to choose a destination category. Then
press additional category buttons to append a suffix to the category mnemonic to
generate the destination name. The name of the new destination appears on the
LCD button.
3 Select a source
If necessary, press ‘Source Mode’ to begin selection of a source. Then press a category
button to choose a source category. Then press additional category buttons to append
a suffix to the category mnemonic to generate the source name.
You can also press a dedicated source button if you have one for that source.
The LCD buttons for preset source levels turn yellow. The name of the source appears in
the preset line of those LCD buttons.
4 Repeat steps 2 and 3 until you have selected, and preset, all the destinations you want.
5 Press the ‘Gang Take’ button (among the function buttons).
The take buttons under the LCD buttons do not perform gang takes.