TM
Loading a Script into SCRIPTview
To load a script after opening, creating or editing a script:
1. Select
Save
from the
File
menu in SCRIPTedit, or click
.
2. Click
[Yes]
in the
Load the Script?
dialog box.
3. If changes were saved before exiting, a message will ask if you want to load the
script into SCRIPTview. Answer
Yes
to load the script, or
No
to return to the original
script in SCRIPTview.
To load a script into the viewer only:
1. Select
File / Open
from the
Viewer
menu.
2. Select the file you wish to load into the viewer.
3. Click
[Yes]
when asked to load the script.
Activating the miniVIEWER
The
miniVIEWER
is a small window that enables you to preview the running script. To take full
advantage of the miniVIEWER’s functionality, you will need to be able to see the following:
•
The miniVIEWER window:
Select
Show miniVIEWER Window
from the
Viewer
menu
(a check appears).
•
The SCRIPTview toolbar:
If the toolbar is not showing, select
Show SCRIPTview
Toolbar
from the
Viewer
menu. The toolbar appears in the SCRIPTedit toolbar area.
To close the miniVIEWER window:
1. Do one of the following:
• Click
in the upper-right corner of the window.
• Select
Show miniVIEWER Window
from the
Viewer
menu (the check
disappears).
SCRIPTview Basics
Page 38
Installation and Operations Manual • © 1999 ParkerVision, Inc.
Your SCRIPT Viewer system operates using two software applications - SCRIPTedit, which was previously explained, and
SCRIPTview, which actually scrolls the text for the talent. You can access the SCRIPTview controls using the Viewer menu, and/or
icons on the toolbar.
