GRASS VALLEY GV KORONA, Руководство пользователя, Страница: 58 / 415

Suite Preferences
About Show Files
60
Note: A best practice is to set register ranges all each time there is an
update (e.g. E-MEM 0-999, Macro 1-999, etc.), this will ensure that new
registers are included.
5 Select the Create button in the Create Show pane.
Result: The Show file is created with the selected file types and appears in the directory.
Load a Show File
You can include or exclude areas of the system when loading a show using the Show Create
& Load menu pane. Including an area will change the state of that part of the system to the
loaded state.
1 Select File Ops , Show Files .
2 Select a Show file to load from the System or Remote Storage menu tab (left side of
menu) and select it.
3 Load the show:
a To load the Show file as is, select the Load Show button in the Show Create & Load
pane.
b To load only selected areas, select the Choose Load button to bring up the Create
Show pane that allows you to see what areas are included in the Show, and enable
or disable the buttons; a highlighted green border means that area of the system
will be included when the show is loaded.
4 For register-based features, you can enter an exact range; select the register data pad
(left of each button) and enter a series or range of registers to be included in the Show
file (the default is all).
Note: A best practice is to set register ranges to all each time there is an
update (e.g. E-MEM 0-999, Macro 1-999, etc.), this will ensure that new
registers are included.
5 Select the Create button in the Create Show pane to load the Show file (not the Load
Show button as this will load the entire Show file without your selections).
Load a Show from the Show Load History
Shows that have been loaded, are displayed in the Show Load History pane on the right
side of the Show Files menu. The list of previously loaded shows are displayed (until the
Clear History button is selected). The “Last Show Load” reflects the date and time that the
top item in history, was loaded—in the current menu.
1 Select File Ops , Show Files .
2 Select a previously loaded show from the Show Load History scrolling list on the right.
CAUTION: : The Eng Setup button (lower right of menu) is off by default
because ports and server IPs are unique. Transferring Show
files from one location to another (including suites) requires
careful planning to prevent interruption.