GRASS VALLEY GV KORONA, Руководство пользователя, Страница: 188 / 415

Switching Basics
Source Select Module
190
the SND is split into two rows of smaller text. SNDs show source names, macro names,
router source and router destination names, Aux bus numbers, etc.
• Shift buttons—Shifts can be mapped anywhere on the Source Select Module (or
nowhere) using the User Prefs, Button Mapping menu (default is 2nd and 3rd on the
second and third source select buttons from the right).
Function and Delegation Buttons
The following describes the function and delegation buttons:
• Hold button—Sets a bus hold on the delegated row.
• M/E bus select buttons— K1 - K6 , A , B , U1 , and U2 in columns 2-4, pressing one of these
buttons delegates that bus.
• Macro select button—Delegates rows 1 and 2 of a Source Select Module to macros.
Note: To delegate one row, hold down the Macro button and press a bus
delegation button or hold down the bus delegation row button and
press the Macro button.
• Key Split button—Creates a split key when a source is selected for the fill signal, the
Key Split button is held down, and a source is selected on a row delegated to the key
bus.
• Far button—The Far modifier is used for DPM rotation transitions. During DPM
operations, the side that is seen by the user is defined as the ‘near side’. To set the far
side for the current delegation of a bus, press and hold the Far button (and shift button
if necessary) and make a source selection for that side.
• Aux select button—Delegates Rows 1 and 2 of a Source Select Module to Aux bus
control.
•
Router
select button—Delegates Rows 1 and 2 of a Source Select Module to Router
selection.
• Rules Hold button—When pressed (toggle), Source Rules will not be applied to the M/E
delegated to that Source Select Module.
• E-MEM select button—Delegates rows 1 and 2 of a Source Select Module to E-MEMs.
Note: To delegate one row, hold down the E-MEM button and press a
bus delegation button or hold down the bus delegation row button and
press the E-MEM button.
• Pri partition select button—Delegates all four rows of a Source Select Module to the
primary partition (Rows 1 and 2 are delegated to the last delegation when Pri was used,
Row 3 is delegated to the A bus and Row 4 is delegated to the B bus).
•
Sec
partition select button—Delegates all four rows of a Source Select Module to the
secondary partition (Rows 1 and 2 are delegated to the last delegation when Sec was
used, Row 3 is delegated to the U1 bus and Row 4 is delegated to the U2 bus).
• Pressing the Pri and Sec buttons together causes both buttons to high tally. Both
partitions are controlled but only tallies for the Primary partition will be seen on
the Source and Local E-MEM modules.
Note: Pressing the Pri or Sec buttons delegates the Transition and Local
E-MEM Modules in addition to the Source Select Module and modifies
what wipe generators can be selected on the Matte and Wipe
delegations of the Multi-Function Module.