GRASS VALLEY GV KORONA, Руководство пользователя, Страница: 292 / 415

Advanced Operations
Insert External Device Control Commands in Macros
296
About Effects Editing in the E-MEM Enables Tab
Effects can be edited in the E-MEM Enables tab for all M/Es by enabling or disabling levels
and sub-levels from the switcher state. An M/E level (i.e. M/E 4 Pri) can be disabled (turned
off ), then one sub-level at a time can be enabled; the M/E level is enabled (turned on) once
one sub-level is enabled.
Note: Disabling then re-enabling an M/E in the E-MEM Enables tab
resets all sub-levels to enabled for that M/E.
Effects edited in the E-MEM Enables tab will run with the level and sub-level states as
selected, however until the Update Levels button is selected, the effect’s E-MEM register is
not modified. A recall of the register will return the register to its saved state.
Enable E-MEM Levels from the E-MEM Enables Tab
M/E levels for an E-MEM can be enabled/disabled from the E-MEM & Timeline, Timeline Edit,
E-MEM Enables menu tab. Proxy eDPM control is also provided, however eDPM sub-levels
are in the eDPM menus. Levels updated in either the Master E-MEM or E-MEM Enables tab
are reflected in both.
Prerequisite: Read the Define E-MEM section in the User Manual for your switcher model.
1 Select an E-MEM register.
2 Select E-MEM & Timeline , Timeline Edit , E-MEM Enables in the menu.
3 Enable or disable E-MEM levels and sub-levels for the selected register.
4 Select Update Levels (top right of menu) to save the effect to the register; the effect can
be run without updating the levels. However, when recalled, the effect will return to the
saved state.
About Additive Keyers
In the keyer circuitry of the switcher, unshaped video is processed using a multiplicative key
and shaped video that is processed using an additive key. In the normal course of
operation, this is done automatically. Shaped video can be turned on or off (unshaped
video) for a source’s linear key in the Key Mode pane of the Eng Setup, Source Definition
menu.