GRASS VALLEY GV KORONA, Руководство пользователя, Страница: 142 / 415

Switcher Control
Playback a Macro Register
144
Delete a Macro Attachment
Delete one or multiple macros from the Control Panel or remove all attachments using the
menu.
1 Enable Delete Macro:
a GV Korona—Tap MAC then tap and hold the Delete button in the TFT Status
Display.
b Kayenne and Karrera—Press and hold the
Delete
button on the System Bar; Macro
buttons high tally.
2 While holding the Delete button, press and hold a Control Panel button with macro
attachments —continue to hold Delete and press and hold additional Control Panel
buttons to delete multiple macro attachments.
Remove all attachments:
1 Select Macros , Attach in the menu.
2 Select Remove All Attachments in the Macro Control pane (top, center).
Append to a Macro
1 Turn on Macro append mode by holding down the Record button for a full second. The
button will turn blue and blink slowly until a macro is selected.
2 Press the macro register button on the delegated keyer row of an existing macro to
which you wish to append additional steps. The Record button will remain colored blue
and blink fast, indicating a Macro is being recorded.
3 Perform the additional steps using the Control Panel and/or the menus.
4 Complete the append by pressing the blinking Record button, or pressing the blinking
keyer row macro register button.
Karrera Macro Operations
Macro Control Button Group
The Macro Control Button group on the System Bar area has eight buttons. These controls
are located above the PGM PST stripe, at the far right of the System Bar area. Pressing the
Macro Ctrl (Control) button delegates the buttons for macros. The eight buttons from left to
right are:
• Att Enable—Attach Enable,
• Show—Show Attached Macros,
• Pre—Pre-Attach Macro,
• Replace—Replace Macro,
• Post—Post-Attach Macro,
• Delete—Delete Macro,
• Ins Delay—Insert Delay in Macro, and
• Record—Record Macro.